Wurmpedia - User contributions [en]

Knarr

2008-10-22T12:32:11Z

Beastenator: /* Vessel details */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[square yard rig]]
* 10x [[belaying pin]]s
* 200x [[Rivets]]
* 10x [[oar]]s
* 1x [[stern]]
* 200x [[tenon]]s
* 1x [[rudder]]
* 8x [[thick rope]]
* 400x [[hull plank]]s
* 100x [[tar]]s
* 400x [[peg]]s
* 80x [[deck board]]
* 3x [[keel section]]
* 4x [[mooring rope]]

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==

[http://en.wikipedia.org/wiki/Knarr Wikipedia Entry]

''It has a clinker-built hull assembled with iron rivets and one mast with a square yard sail. At insufficient wind it is rown with oars. The side rudder is on the starboard side.''

The second largest ship possible to construct. Has permission management.

== Vessel details ==
*Passengers: 1 Captain + ? crew.
*Minimum total crew: 3
*Maximum speed: ? km/h (solo).
*Maximum speed: ? km/h (full crew).
*Hold Capacity: ? kg
*Size: 4 tiles by 1 tiles
*Height: 8 dirt from water level to deck(?)

{{Infobox|Boat speeds are relative and depend greatly on weather conditions.}}

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/K]]

Cog

2008-10-22T12:31:14Z

Beastenator: /* Vessel details */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 300x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 400x [[peg]]s
* 8x [[thick rope]]
* 1x [[stern]]
* 1x [[large square rig]]
* 2x [[keel section]]
* 1x [[rudder]]
* 60x [[deck board]]
* 50x [[tar]]s
* 2x [[oar]]s
* 4x [[mooring rope]]

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==

''A sturdy one-masted merchant ship with a flat bottom.'' ([http://en.wikipedia.org/wiki/Cog_%28ship%29 Wikipedia Entry])

A medium difficulty ship, the cog requires fewer sails but more wooden materials than the [[corbita]] and is harder to create. One large advantage it has over the similarly sized corbita is that the first passenger to board is put into the [[crows nest]], giving them a great view of the surrounding area.

== Vessel details ==
*Passengers: 1 Captain + 8 crew.
*Maximum speed: 31.48 km/h (solo, with a [[gale]] in the back).
*Maximum speed: 35(?) km/h (full crew).
*Hold Capacity: ? kg.
*Size: 5 tiles by 2 tiles (?)
*Height: 40 dirt from water level to deck(?)

{{Infobox|Boat speeds are relative and depend greatly on weather conditions.}}

== Screenshot==
[http://img355.imageshack.us/img355/6972/cog1ma5.jpg http://img355.imageshack.us/img355/6972/cog1ma5.th.jpg]
{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-10-22T12:29:10Z

Beastenator:

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s
|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat). Has manageable permissions.

== Vessel details ==
*Passengers: 1 captain + 6 crew.
*Maximum speed: 24.68 km/h (in a [[gale]])
*Hold Capacity: More than 20,000 liters
*Size: 5 tiles by 2 tiles
*Height: 25 dirt from water level to deck

{{Infobox|Boat speeds are relative and depend greatly on weather conditions.}}

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Player:Beastenator

2008-10-07T17:45:49Z

Beastenator: /* Avaters */

{{HP-home-mr}}

===Beastenator===
This Creature called Beastenator is a very rare species, It has been seen since octobre 2005, it seems to be able to talk however this is still unconfirmed. You can contact this critter if you need help ingame.

===Abilities===
*Can swim
*Can climb most cliffs
*Can't fly (unless you mean cliffdiving)
*Only Aggressive towards JK and HotS
*Gives 'Outlaw' title when killed.

*Likes building and traveling
*Hates making bricks, some have seen him making them though

*Used to be member of [[Roadside]], now lives on MR Home

===Titles===
*Trollslayer
*Digger
*Mason

===Avaters===
http://i36.tinypic.com/2qu59ww.png http://i35.tinypic.com/6sc0fa.jpg http://i34.tinypic.com/11l0f0x.jpg http://i38.tinypic.com/8zigye.jpg http://i37.tinypic.com/v5gvm0.jpg http://i34.tinypic.com/2822gsi.png http://i35.tinypic.com/2r3hu8y.png http://i38.tinypic.com/2qjlzyh.png http://i37.tinypic.com/2s19oac.png http://i34.tinypic.com/fbgs2p.png http://i35.tinypic.com/zlpwxs.png http://i34.tinypic.com/2929qgh.png http://i37.tinypic.com/fyk22g.png http://i34.tinypic.com/2expzl5.png http://i33.tinypic.com/aaip15.png http://i36.tinypic.com/15etkp5.png http://i36.tinypic.com/2q9lvu8.png http://i33.tinypic.com/1zgqedl.png http://i34.tinypic.com/307ncb8.png http://i38.tinypic.com/34nsbhy.png http://i36.tinypic.com/3vp81.png http://i34.tinypic.com/20755oi.png http://i36.tinypic.com/66g6k7.png http://i38.tinypic.com/5nrpt2.png http://i35.tinypic.com/w0qfr5.png

Player:Beastenator

2008-10-03T09:03:58Z

Beastenator: /* Avaters */

Player:Beastenator

2008-10-03T08:58:43Z

Beastenator: /* Avaters */

Player:Beastenator

2008-10-03T08:58:21Z

Beastenator: /* Avaters */

{{HP-home-mr}}

===Beastenator===
This Creature called Beastenator is a very rare species, It has been seen since octobre 2005, it seems to be able to talk however this is still unconfirmed. You can contact this critter if you need help ingame.

===Abilities===
*Can swim
*Can climb most cliffs
*Can't fly (unless you mean cliffdiving)
*Only Aggressive towards JK and HotS
*Gives 'Outlaw' title when killed.

*Likes building and traveling
*Hates making bricks, some have seen him making them though

*Used to be member of [[Roadside]], now lives on MR Home

===Titles===
*Trollslayer
*Digger
*Mason

===Avaters===
http://i36.tinypic.com/2qu59ww.pnghttp://i35.tinypic.com/6sc0fa.jpghttp://i34.tinypic.com/11l0f0x.jpghttp://i38.tinypic.com/8zigye.jpghttp://i37.tinypic.com/v5gvm0.jpghttp://i34.tinypic.com/2822gsi.png http://i35.tinypic.com/2r3hu8y.png http://i38.tinypic.com/2qjlzyh.png http://i37.tinypic.com/2s19oac.png http://i34.tinypic.com/fbgs2p.png http://i35.tinypic.com/zlpwxs.png http://i34.tinypic.com/2929qgh.png http://i37.tinypic.com/fyk22g.png http://i34.tinypic.com/2expzl5.png http://i33.tinypic.com/aaip15.png http://i36.tinypic.com/15etkp5.png http://i36.tinypic.com/2q9lvu8.png http://i33.tinypic.com/1zgqedl.png http://i34.tinypic.com/307ncb8.png http://i38.tinypic.com/34nsbhy.png http://i36.tinypic.com/3vp81.png http://i34.tinypic.com/20755oi.png http://i36.tinypic.com/66g6k7.png

Player:Beastenator

2008-10-03T08:57:41Z

Beastenator: /* Avaters */

Player:Beastenator

2008-10-03T08:56:11Z

Beastenator: /* Titles */

{{HP-home-mr}}

===Beastenator===
This Creature called Beastenator is a very rare species, It has been seen since octobre 2005, it seems to be able to talk however this is still unconfirmed. You can contact this critter if you need help ingame.

===Abilities===
*Can swim
*Can climb most cliffs
*Can't fly (unless you mean cliffdiving)
*Only Aggressive towards JK and HotS
*Gives 'Outlaw' title when killed.

*Likes building and traveling
*Hates making bricks, some have seen him making them though

*Used to be member of [[Roadside]], now lives on MR Home

===Titles===
*Trollslayer
*Digger
*Mason

===Avaters===
[img]http://i36.tinypic.com/2qu59ww.png[/img] [img]http://i35.tinypic.com/6sc0fa.jpg[/img] [img]http://i34.tinypic.com/11l0f0x.jpg[/img] [img]http://i38.tinypic.com/8zigye.jpg[/img] [img]http://i37.tinypic.com/v5gvm0.jpg[/img] [img]http://i34.tinypic.com/2822gsi.png[/img] [img]http://i35.tinypic.com/2r3hu8y.png[/img] [img]http://i38.tinypic.com/2qjlzyh.png[/img] [img]http://i37.tinypic.com/2s19oac.png[/img] [img]http://i34.tinypic.com/fbgs2p.png[/img] [img]http://i35.tinypic.com/zlpwxs.png[/img] [img]http://i34.tinypic.com/2929qgh.png[/img] [img]http://i37.tinypic.com/fyk22g.png[/img] [img]http://i34.tinypic.com/2expzl5.png[/img] [img]http://i33.tinypic.com/aaip15.png[/img] [img]http://i36.tinypic.com/15etkp5.png[/img][img]http://i36.tinypic.com/2q9lvu8.png[/img] [img]http://i33.tinypic.com/1zgqedl.png[/img] [img]http://i34.tinypic.com/307ncb8.png[/img] [img]http://i38.tinypic.com/34nsbhy.png[/img][img]http://i36.tinypic.com/3vp81.png[/img] [img]http://i34.tinypic.com/20755oi.png[/img] [img]http://i36.tinypic.com/66g6k7.png[/img]

Talk:MR Home by Kinoss

2008-08-07T11:33:30Z

Beastenator: Removing all content from page

Corbita

2008-08-05T19:55:53Z

Beastenator: /* Screenshots */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

== Screenshots==
[http://img168.imageshack.us/img168/3028/wurm042lk9za6.jpg http://img168.imageshack.us/img168/3028/wurm042lk9za6.th.jpg]
{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-08-05T19:55:42Z

Beastenator: /* Screenshots */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

== Screenshots==
[[http://img168.imageshack.us/img168/3028/wurm042lk9za6.jpg http://img168.imageshack.us/img168/3028/wurm042lk9za6.th.jpg]]
{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-08-05T19:55:10Z

Beastenator: /* Notes */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

== Screenshots==
[http://img168.imageshack.us/img168/3028/wurm042lk9za6.jpg
http://img168.imageshack.us/img168/3028/wurm042lk9za6.th.jpg]
{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-08-05T19:47:45Z

Beastenator: /* Description */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-08-05T19:47:00Z

Beastenator: /* Description */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==

[http://img530.imageshack.us/my.php?image=wurm042lk9.png]

''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Rowing boat

2008-08-05T19:44:31Z

Beastenator: /* Screenshots */

Corbita

2008-08-05T19:38:06Z

Beastenator: /* Notes */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-08-05T19:36:22Z

Beastenator: /* Notes */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

+ Fernando is awesome

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-08-05T19:34:46Z

Beastenator: /* Description */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a speed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Corbita

2008-08-05T19:24:29Z

Beastenator: /* Description */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).
*Note, this may be outdated, jolinar got a soeed of 10,10kph solo with only a breeze.

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Player talk:Beastenator

2008-08-04T19:33:23Z

Beastenator: Removing all content from page

Player talk:Beastenator

2008-08-04T19:33:14Z

Beastenator: New page: discuss.

discuss.

User talk:Beastenator

2008-08-04T19:32:56Z

Beastenator: Redirecting to Player talk:Beastenator

#redirect [[player talk:beastenator]]

User:Beastenator

2008-08-04T19:31:46Z

Beastenator: Redirecting to Player:Beastenator

#redirect [[player:beastenator]]

User:Beastenator

2008-08-04T19:31:29Z

Beastenator:

redirect [[player:beastenator]]

User:Beastenator

2008-08-04T19:29:58Z

Beastenator: New page: redirect:player beastenator

[[redirect:player beastenator]]

Corbita

2008-08-04T18:10:18Z

Beastenator: /* Description */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 1x [[stern]]
* 40x [[deck board]]
* 2x 13kg [[rudder]]s
* 50x [[tar]]s
* 1x [[square rig]]
* 2x [[keel section]]
* 4x [[mooring rope]]
* 1x [[spinnaker rig]]
* 400x [[peg]]s
* 8x [[thick rope]]
* 200x [[hull plank]]s
* 10x [[belaying pin]]s
* 200x [[tenon]]s
* 2x [[oar]]s

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
''A ship with square sails steered by two side rudders connected to each other.''

The smallest ship possible to make (ships excluding rowing boat and sailing boat).

Manageable permissions confirmed.

Speed Tests performed in game by [[Player:Maximustehgreat|Maximustehgreat]], Using a 30ql Corbita.
*1 captain + 6 crew.

*Average speed = 1 km/h (solo).
*Average speed = 8 km/h (full crew).

*Max speed = 2 km/h (solo).
*Max speed = 17 km/h (full crew).

*Hold Capacity = 100 hull planks, 21+ felled trees, over 1000 kg.

*Size = 3x2(?)
*Height = 25 dirt from water level to deck(?)

== Notes ==

PALMERJESUS:

I got 14+ KM/H on a corbita in a strong breeze, going with the wind, and 9 KM/H when I slightly zig zag against the wind.

{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/C]]

Rowing boat

2008-08-04T18:08:50Z

Beastenator: /* Vessel details */

Small sailing boat

2008-08-04T18:08:24Z

Beastenator: /* Description */

[[CDB|Main]] / [[Skills]] / [[Carpentry]] / [[Ship building]] / '''{{PAGENAME}}'''

{{item
|name={{PAGENAME}}
|active=[[keel section]]
|passive=[[keel section]]
|group=Containers
|materials=* 2x [[oar]]s
* 1x [[mooring rope]]
* 50x [[peg]]s
* 50x [[tenon]]s
* 1x [[stern]]
* 50x [[hull plank]]s
* 10x [[tar]]s
* 4x [[seat]]s
* 1x [[keel section]]
* 1x [[triangular rig]]
* 4x [[belaying pin]]s
* 2x [[thick rope]]

|result=*'''{{PAGENAME}}'''
|skill=ship building
}}

== Description ==
A small sailing boat that will accommodate up to five people.

*1 captain + 4 crew

*Average speed = 7.64 km/h (solo)
*Average speed = ? km/h (full crew)

*Max speed = ? km/h (solo)
*Max speed = ? km/h (full crew)

*Hold Capacity = ? kg

*Size = 2x1
*Height = 3 dirt from water level to deck
*Depth = 5 dirt deep

== Notes ==
*The second smallest boat possible to make (excluding the [[raft]], which isn't a true ship).
*A full unfinished sailboat only weighs 933.50 kg, so you can drag it around in a small cart and add components to it. Bring the cart to water before finishing it. It will drop out when you add the last component.
*0.31 km/h against a strong wind.
*20.10 [[mind logic]] is needed to command a {{PAGENAME}}, so premium is required.

Manageable permissions confirmed.

== Total components ==

* 4x [[belaying pin]]s
* 2x [[cordage rope]] (for triangular rig)
* 61x [[hull plank]]s (50x + 11x for stern)
* At least 3x [[keel section]] (1x + 2x to start)
* 1x [[mooring rope]]
* 2x [[oar]]s
* 70x [[peg]]s (50x + 20x for stern)
* 4x [[seat]]s
* 1x [[small mast]] (for triangular rig)
* 2x [[small tackle]] (for triangular rig)
* 10x [[tar]]s
* 60x [[tenon]]s (50x + 10x for stern)
* 2x [[thick rope]]
* 1x [[triangular sail]] (for triangular rig)

=== Intermediate components ===

* 1x [[stern]]
* 1x [[triangular rig]]

== Screenshots ==

[http://img390.imageshack.us/img390/8674/wurm010sg2.jpg http://img390.imageshack.us/img390/8674/wurm010sg2.th.jpg]
{{shiplist}}

[[Category:Boats]]
[[Category:Containers]]
[[Category:Babel/S]]

Rowing boat

2008-08-04T18:07:45Z

Beastenator: /* Vessel details */

Talk:MR Home by Kinoss

2008-08-04T16:17:52Z

Beastenator:

The south coast seems to be innacurate, got lost there and couldn't find my way back...

Talk:MR Home by Kinoss

2008-08-04T16:17:23Z

Beastenator: New page: The south coast seems to be innacurate

The south coast seems to be innacurate

Guides talk:Wurm mapping

2008-08-04T14:54:14Z

Beastenator:

the mine tiles are a bit more tricky, its still a 4x4 tile , but there are 9 points you can lower in the one tile, so i drew a 4x4 square then quartered it, both across and diagonally to give me 8 parts per tile. Is it possiblt to lift(or lower actually) tiles at intersections? [[User:Stika 1|Stika 1]] 01:20, 4 August 2008 (CDT)

-------------------------------------------------------------------------------

I don't have very good guides for caves really, but it shouldn't be to hard. Mine tiles are basicly the same as on the outside, make the floorplan of it and then add lines straight up for the ceiling and connect them all, or you could draw the line up and use the follow me tool and drag the floor up to the top of the line up. - [[player:beastenator|Beastenator]] August 8th 2008. 15:53 (GMT)

Guides talk:Wurm mapping

2008-08-04T14:53:05Z

Beastenator:

the mine tiles are a bit more tricky, its still a 4x4 tile , but there are 9 points you can lower in the one tile, so i drew a 4x4 square then quartered it, both across and diagonally to give me 8 parts per tile. Is it possiblt to lift(or lower actually) tiles at intersections? [[User:Stika 1|Stika 1]] 01:20, 4 August 2008 (CDT)

-------------------------------------------------------------------------------

I don't have very good guides for caves really, but it shouldn't be to hard. Mine tiles are basicly the same as on the outside, make the floorplan of it and then add lines straight up for the ceiling and connect them all, or you could draw the line up and use the follow me tool and drag it up to the top of the line up. - [[player:beastenator|beastenator]] August 8th 2008. 15:53 (GMT)

User talk:Kinoss

2008-08-04T14:29:53Z

Beastenator:

It's nice to see the map project is still going strong. I would like to suggest that instead of updating the geography page, you update the map page itself with the last update information. That way it's accessible to people who use direct links as well, and it keeps map-specific info on the map page. - [[User:Dashiva|Dashiva]] 12:35, 25 October 2007 (CDT)

------------------------------------------------------------------------------

You are doing a great job on the MR home map, I have no idea how you can map that amount of land in such a short time, I tried mapping a bit of my island but I soon found out it's really tough to do and I got bored after mapping like 1/5th of it, do you have any hints or tips for mapping?

my island is in the SE, I would really like it if you could do the outlines of it so I could try to start adding grass etc to it - [[Player:Beastenator|Beastenator]] 15:28, August 4th 2008 (GMT)

User talk:Kinoss

2008-08-04T14:28:33Z

Beastenator:

It's nice to see the map project is still going strong. I would like to suggest that instead of updating the geography page, you update the map page itself with the last update information. That way it's accessible to people who use direct links as well, and it keeps map-specific info on the map page. - [[User:Dashiva|Dashiva]] 12:35, 25 October 2007 (CDT)

You are doing a great job on the MR home map, I have no idea how you can map that amount of land in such a short time, I tried mapping a bit of my island but I soon found out it's really tough to do and I got bored after mapping like 1/5th of it, do you have any hints or tips for mapping?

my island is in the SE, I would really like it if you could do the outlines of it so I could try to start adding grass etc to it - [[Player:Beastenator|Beastenator]] 15:28, August 4th 2008 (GMT)

User talk:Kinoss

2008-08-04T14:26:27Z

Beastenator:

It's nice to see the map project is still going strong. I would like to suggest that instead of updating the geography page, you update the map page itself with the last update information. That way it's accessible to people who use direct links as well, and it keeps map-specific info on the map page. - [[User:Dashiva|Dashiva]] 12:35, 25 October 2007 (CDT)

You are doing a great job on the MR home map, i have no idea how you can map that amount of land in such a short time, i tried mapping a bit of my island but i soon found out it's really tough to do and i got bored after i only mapped like 1/5th of it, do you have any hints or tips for mapping?

my island is in the SE, i would really like it if you could do the outlines of it so i can try to start adding grass etc to it

Guides:Wurm mapping

2008-08-03T12:06:05Z

Beastenator: /* Hints and tips */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software, [http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand Sketchup; you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the [http://img360.imageshack.us/img360/5919/guidesv6.jpg lower right box] are in meters, if not go to [http://img360.imageshack.us/img360/116/preferencesmv1.jpg preferences] and set it to metric meters 3D in template tab.
* Now make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

==Hints and tips==

*Download all wurm models and save them in one file, this can speed up your mapping.
* The best way to improve in Wurm mapping is by doing it often.
* Try making some non-wurm models as well, by doing so you'll understand more complex structures and you'll be able to make more complicated maps.
* If you have trouble raising the land exactly, you can make a [http://img510.imageshack.us/img510/6030/linerps8.jpg vertical liner] for it.

[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T12:05:02Z

Beastenator: /* Introduction */

Guides:Wurm mapping

2008-08-03T12:04:10Z

Beastenator: /* Introduction */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software, [http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the [http://img360.imageshack.us/img360/5919/guidesv6.jpg lower right box] are in meters, if not go to [http://img360.imageshack.us/img360/116/preferencesmv1.jpg preferences] and set it to metric meters 3D in template tab.
* Now make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

==Hints and tips==

*Download all wurm models and save them in one file, this can speed up your mapping.
* The best way to improve in Wurm mapping is by doing it often.
* Try making some non-wurm models as well, by doing so you'll understand more complex structures and you'll be able to make more complicated maps.
* If you have trouble raising the land exactly, you can make a [http://img510.imageshack.us/img510/6030/linerps8.jpg vertical liner] for it.

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T12:03:18Z

Beastenator: /* Hint's and tips */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the [http://img360.imageshack.us/img360/5919/guidesv6.jpg lower right box] are in meters, if not go to [http://img360.imageshack.us/img360/116/preferencesmv1.jpg preferences] and set it to metric meters 3D in template tab.
* Now make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

==Hints and tips==

*Download all wurm models and save them in one file, this can speed up your mapping.
* The best way to improve in Wurm mapping is by doing it often.
* Try making some non-wurm models as well, by doing so you'll understand more complex structures and you'll be able to make more complicated maps.
* If you have trouble raising the land exactly, you can make a [http://img510.imageshack.us/img510/6030/linerps8.jpg vertical liner] for it.

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T12:03:03Z

Beastenator: /* Cleaning the map up */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the [http://img360.imageshack.us/img360/5919/guidesv6.jpg lower right box] are in meters, if not go to [http://img360.imageshack.us/img360/116/preferencesmv1.jpg preferences] and set it to metric meters 3D in template tab.
* Now make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

==Hint's and tips==

*Download all wurm models and save them in one file, this can speed up your mapping.
* The best way to improve in Wurm mapping is by doing it often.
* Try making some non-wurm models as well, by doing so you'll understand more complex structures and you'll be able to make more complicated maps.
* If you have trouble raising the land exactly, you can make a [http://img510.imageshack.us/img510/6030/linerps8.jpg vertical liner] for it.
{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:48:08Z

Beastenator: /* Wurm Mapping */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the [http://img360.imageshack.us/img360/5919/guidesv6.jpg lower right box] are in meters, if not go to [http://img360.imageshack.us/img360/116/preferencesmv1.jpg preferences] and set it to metric meters 3D in template tab.
* Now make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:46:26Z

Beastenator: /* Wurm Mapping */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the [http://img360.imageshack.us/img360/5919/guidesv6.jpg lower right box] are in meters, if not go to [http://img360.imageshack.us/img360/116/preferencesmv1.jpg preferences] and set it to metric meters 3D in template tab.
* Now select make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:38:11Z

Beastenator: /* Wurm Mapping */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the [http://img360.imageshack.us/img360/5919/guidesv6.jpg lower right box] are in meters, if not go to preferences and set it to metric meters 3D in template tab.
* Now select make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:32:57Z

Beastenator: /* Houses and fences */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the lower right box are in metres,if not go to preferences and set it to metric meters 3D in template tab.
* Now select make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, Take the low stone model and pull it to 5 Meters high
* Start placing the models in the correct place, always make sure the outside of a house wall lines up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:31:41Z

Beastenator: /* Houses and fences */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the lower right box are in metres,if not go to preferences and set it to metric meters 3D in template tab.
* Now select make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house, fence and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, make a rectangle as long as a tile border, and pull it to 5 metres high.
* Start placing the models in the correct place, always make sure the outside of a wall has to line up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:31:11Z

Beastenator: /* Cleaning the map up */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the lower right box are in metres,if not go to preferences and set it to metric meters 3D in template tab.
* Now select make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house models, fence models and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, make a rectangle as long as a tile border, and pull it to 5 metres high.
* Start placing the models in the correct place, always make sure the outside of a wall has to line up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and other unneeded lines
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:30:06Z

Beastenator: /* Slopes */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the lower right box are in metres,if not go to preferences and set it to metric meters 3D in template tab.
* Now select make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise, press up key and raise the corner 0,1 meter per dirt high.

====Houses and fences====
* Download the needed house models, fence models and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, make a rectangle as long as a tile border, and pull it to 5 metres high.
* Start placing the models in the correct place, always make sure the outside of a wall has to line up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and unneeded stuff
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]

Guides:Wurm mapping

2008-08-03T11:29:06Z

Beastenator: /* The Basics */

==Introduction==
I've read many wurmians use a 3D modeling tool to plan their projects, Because of that i've decided to make a Guide for one of these software,[http://sketchup.google.com/ Google Sketchup]. It's not very hard to understand and you'll soon find out you're able to plan a wurm project with it. If you need any help send [[Player:Beastenator|me]] a pm ingame or on the forums (name: Beast)

==The Basics==
Sketchup isn't very hard. You can learn the basics in a couple of minutes using [http://sketchup.google.com/training/videos.html official tutorials] and [http://download.sketchup.com/downloads/training/tutorials50/Sketchup%20Video%20Tutorials.html videos]. The only thing I can say is try to make some simple things like blocks first. When you think you're ready for the Wurm mapping, read on.

==Wurm Mapping==
Before you make something in Sketchup i suggest you use a 2d mapping tool like [http://discon.googlepages.com/mapper.html this one] first

* Make sure the the measures in the lower right box are in metres,if not go to preferences and set it to metric meters 3D in template tab.
* Now select make a square of 4x4 meters. Just start drawing a square and type 4,4 then hit enter.
* Copy the squares to make a grid
* Download the needed models from Wurm on the Sketchup Warehouse.
* Click on the paint bucket and sample the paint from the needed tile type.
* Paint the tiles in grid.

====Slopes====
* Use the move tool to raise land, click on the corner you want to raise/lower press up key and raise/lower the corner .1M per dirt high

====Houses and fences====
* Download the needed house models, fence models and gate models.
** If you need a pallisade, Draw a some circles next to eachother and pull them to around 5 metres high. You can make cones on them as well if you like
** If you need a Tall stone wall, make a rectangle as long as a tile border, and pull it to 5 metres high.
* Start placing the models in the correct place, always make sure the outside of a wall has to line up with the tile border.

====Roofs====
* Place roofs above the houses using the roof models tich made.
* If you want to combine the 1/4th parts with the 1x1 parts, place them next to eachother and fix them.

====Cleaning the map up====
* Delete all guides and unneeded stuff
* Take a look at the landscape components in windows -> components.
* Add some trees if you wish, but keep in mind they strongly increase your file size

{{cleanup}}
[[Category:Babel/W]]
[[Category:Guides]]