Clad

From Wurmpedia
Jump to navigation Jump to search

Main / Structures / Walls / Clad

Contents

Description

Clad is the terminology given to the process of applying materials to an existing reinforced mine wall. This is used in a decorative or aesthetic purpose, and has no further reinforcement effect on the tile it is applied to. Requires at least 30 masonry to perform the action.

Clad Options

Wall Type Material Used Image
Stone brick Stone brick x10
Mortar x10
 
Marble brick Marble brick x10
Mortar x10
 
Pottery brick Pottery brick x10
Mortar x10
 
Round stone brick Rounded stone x10
Mortar x10
 
Sandstone brick Sandstone brick x10
Mortar x10
 
Slate brick Slate brick x10
Mortar x10
 
Wood clad Plank x10
Large nails x1
 
Rendered brick Stone brick reinforced wall + Clay (10kg)  

Method

To clad a mine wall, one must first reinforce it with a support beam.

Activate a trowel (for brick cladding), or a hammer or mallet (for wooden cladding), right-click the reinforced wall, then click the desired Clad option. Then, use the same tool to continue cladding with the materials listed.

To create a rendered brick reinforced wall, first clad with stone bricks and mortar to create a stone brick reinforced wall, then combine clay into a single unit at least 10kg large. Activate the clay, right-click the wall, and click Render wall. 10kg of clay will be consumed and the wall will become rendered.

Removing clad

Clad must be removed with the use of a crowbar. After clad removal, the tile will remain reinforced and unprepared as it was prior to its cladding.

See also