63
edits
Changes
Jump to navigation
Jump to search
*Remove trees, houses, fences at both end tiles where the bridge should have enough drop off.
*For bridges from a building, all walls under the bridge must be a solid wall type. Arched, windowed, barred, and doors will not provide enough support.
*Ground slope below bridge must be a minimum of 10
'''There are some terrains nearby'''
== Notes ==
* Bridge Bridges cannot be renamed after its they are built by anyone else but Owner of the bridgeplayer who originally created it. Furthermore, the Bridge ownership naming rights cannot be transferred eitherto another player.
* Bridges can be 1-3 tiles wide, no matter the creator's skill, except for wood bridges which cannot exceed 2 tiles in width and rope bridges which are always 1 tile in width.
* Bridges and their components cannot be dyed.
*An approximation for the length of a bridge that can be planned is quality x 0.4, but as its almost impossible to stand on the tile borders its best to add 1-2 quality, Note that the lowest QL between the two tools ( [[dioptra]] or [[range pole]] ) will determine the max length of bridge you can plan.
*Flat Bridges over 5 tiles will require 1 or more support tiles added to the bridge plan
*Bridges must have at least a 10 slope below to have enough clearance.
*Bridges can be built from brick type support platforms but not wooden.
* '''Building Tip:''' Building 2 or more tile wide bridges can be difficult to plan. As the diagram shows below you must offset your two characters (the A and the B in the diagram) by how many tiles wide you want the bridge to be and make the two characters face each other.
