Changes

==Creation==* To start Attached docks: you build a dock flatten a tile and floor adjacent to the house* Free-standing docks: you plan and build a flooron a flat tile. ** Right click tile border of the completed floor and plan an adjacent floor-choose they . Choose the type you want.** Once a support has been built you can then build a floor above it. ** [[House]]s and or [[Fence]]s can also be built on the dock. 

* [[mallet]] or [[hammer]] for wooden docks and [[trowel]] for masonry ones.* You can build [[fence]]s and [[house]]s on top of the supports docks and once completed it will become part of the structure. * destroying You can only add to the house on the level where you started the house plan. So you can't build part of the house on a dock.** When you add walls on ground level after you build a house on the docks, the ground level will determine the floorplan.** Destroying the structure will not destroy the floor on the support, it will need to be destroyed separately.* [[Highway]]s Docks can be built from wood (uses Planks, beams and [[bridge]]s will also work with floors small nails) or any kind of stone (this includes supported onesuses bricks and mortar) outside of houses.* docks can be built in all types. Choose the type you want when planning the adjacent tiles.* You can not dig, drop dirt or sand under finished supports. ** To change the floor from sand to dirt activate a dirt and click the tile -> switch tile.* Wooden docks have two types: Brace and Support. Braces are supporting floor from one side visually.** Wooden supports show the color of the woodtype of the last added part.** Wooden brace supports do '''not''' show woodtype.* Wooden dock supports have a max height of 120 dirts. * Wooden brace supports have a max height of 300 dirts.* Stone dock supports have a max height of 300 dirts. * Note, support heights are capped by skill.