Changes

Jump to navigation Jump to search

Bridges

602 bytes added, 02:26, 13 January 2019
m
Added note about conflict concerns between neighboring bridge and building tiles.
|Masonry
|-
!Marble/Slate/Sandstone
|40
|49
|Masonry
|-
!Arched Marble/Slate/Sandstone
|60
|66
|Masonry
|-
|Marble/Slate/Sandstone/Rounded Stone
|40
|Masonry
|Masonry
|-
|Arched Marble/Slate/Sandstone
|40
|Masonry
As with reinforced cave floors, this is accomplished first by activating [[mortar]] and using it to '''Prepare''' the surface of the bridge, then using the appropriate pavement material to pave the prepared tile.
 
[[Pavement]] can be removed from [[bridges]] at any time using a [[crowbar]]
== Gallery ==
== Notes ==
* The first level of a house is calculated at 33 dirt. Each additional level adds 30 dirt.
* Brick/Marble/Wood /Slate/Sandstone bridges require solid walls directly below, for at least two stories of the building. Example: 3-story house can have a door on the first floor, but must have solid walls for the next two floors on the side with a connecting bridge.
* Any bridges connected directly to a structure will disappear upon the structure being destroyed.
* Bridges will only begin to decay after a week of no use.
* Modifying the terrain after planning a bridge will require re-planning the bridge.
* You can dig under bridges, with the exception of at the ends or next to supports.
* On neighboring tiles, bridges and buildings do not generally cause a conflict with one another. This is regardless of the order in which each is built.* Bridges cannot be built over any tile that has a [[settlement token]] or any opening into a mine. These obstacles must be located 2 tiles away from any bridge component, at least, in order for successful bridge planning to take place. See image on [[mine doorrope bridge]]page for visual example (here the mine entrance is located just outside of the interference range).
* '''Building Tip:''' Building 2 or more tile wide bridges can be difficult to plan. As the diagram shows below you must offset your two characters (the A and the B in the diagram) by how many tiles wide you want the bridge to be and make the two characters face each other.
* [[Brick bridge]]
* [[Marble bridge]]
* [[Landbridges]]
* [[Dioptra]]
* [[Range pole]]
editor
1,184

edits

Navigation menu