Docks

Description

This feature allows you to build floors outside of houses and plan floors from an adjacent floor border into open air or sloped tiles.

Attached docks: you build a floor adjacent to the house
Free-standing docks: you plan and build a floor on a flat tile.
- Right click tile border of the completed floor and plan an adjacent floor. Choose the type you want.
- Once a support has been built you can then build a floor above it.
- Houses and or Fences can also be built on the dock.

mallet or hammer for wooden docks and trowel for masonry ones.
You can build fences and houses on top of the docks and once completed it will become part of the structure.
You can only add to the house on the level where you started the house plan. So you can't build part of the house on a dock.
- When you add walls on ground level after you build a house on the docks, the ground level will determine the floorplan.
- Destroying the structure will not destroy the floor on the support, it will need to be destroyed separately.
Docks can be built from wood (uses Planks, beams and small nails) or any kind of stone (uses bricks and mortar). Choose the type you want when planning the adjacent tiles.
You can not dig, drop dirt or sand under finished supports.
- To change the floor from sand to dirt activate a dirt and click the tile -> switch tile.
Wooden docks have two types: Brace and Support. Braces are supporting floor from one side visually.
- Wooden supports show the color of the woodtype of the last added part.
- Wooden brace supports do not show woodtype.
Wooden dock supports have a max height of 120 dirts.
Wooden brace supports have a max height of 300 dirts.
Stone dock supports have a max height of 300 dirts.
Note, support heights are capped by skill.